Removing LSP with Pro Polish

[ajc347]

Just wanted to check whether applying Pro Polish with a finishing pad would be sufficient to remove previous layers of wax / sealants or whether a polishing pad is needed?

 

[BigLeegr]

It should be enough, as long as you don't go too fast.

 

[ajc347]

It should be enough, as long as you don't go too fast.

Thanks for the reply mate.

I should have said I'm using a DA polisher so would not go above speed 5 on this.

I'm presuming that this won't be to fast?

 

[Redwings97]

I would actually use speed 3.. Keep the speed down allows the product to work longer, giving it more cleaning time.

 

[BigLeegr]

Sorry, by "fast" I was referring to the speed of the passes, not the speed of the machine.

 

[ajc347]

Sorry, by "fast" I was referring to the speed of the passes, not the speed of the machine.

No worries mate.

Thanks for your help.

 

[ajc347]

I would actually use speed 3.. Keep the speed down allows the product to work longer, giving it more cleaning time.

Thanks for the info mate.

I must admit it felt better to work with when I was spreading it around on speed setting 3 with a finishing pad than when I upped the speed to setting 5 (compared to SSR1that is).

 

[ronkh]

So what are you going to do to it now?