Diluted Spray and Rinse to do wheels.

rabbi

Moderator
Had a 1/2 bottle(16oz) of Spray and Rinse left so I filled it with water and shook it. Did some unpolished aluminum wheels that I considered real dirty but not filthy/nasty. Sprayed each wheel completely(nook/crannies) before I came back and rinsed them off. After a thorough rinsing of the wheels I was left with very little dirt. I easily removed the dirt with a rag and the wheels looked immaculate. After the wheel bath I checked the remaining contents of the bottle and seen that I had used about half a bottle.Don't know if I used too much or not but it certainly made/makes wheel cleaning easy. Tomorrow when I wax (3rd time) again I'll go over the wheels with just Super Slick and Suds then treat with Poorboy's Wheel Sealant.
 

rabbi

Moderator
So how much do you use when you're just doing what you would consider an average dirty wheel job?
 
Top