M
MisterShark
Guest
I just used it for the second time and got the same results again, despite following the directions (using the product sparingly), using premium MFs (a very plush MF that's ideal for QDs and waterless washing for the intial wipe, followed by another slightly less-plush MF for a second drying pass): I still ended up with streaky areas over more of my car than I'm happy with.
The first time I used it it was likely about 60 degrees (f) and this time just today it was 39 degrees (f).
If my only test had been conducted during today's brisk temps then I would write it off since some solutions act less than optimally when nearing freezing temperatures, but this wasn't the case.
I was mindful of working only one panel at a time with the car in full shade, spraying and immediately wiping, to ensure against the product prematurely drying. My 2nd drying pass also immediately followed. Streaking in multiple areas resulted all the same, making it necessary to re-spray and wipe once again.
What am I doing wrong?
The first time I used it it was likely about 60 degrees (f) and this time just today it was 39 degrees (f).
If my only test had been conducted during today's brisk temps then I would write it off since some solutions act less than optimally when nearing freezing temperatures, but this wasn't the case.
I was mindful of working only one panel at a time with the car in full shade, spraying and immediately wiping, to ensure against the product prematurely drying. My 2nd drying pass also immediately followed. Streaking in multiple areas resulted all the same, making it necessary to re-spray and wipe once again.
What am I doing wrong?