ssr2.5 vs meguiars scratch x

[4pbears]

last weekend i worked on a 95 dark green metallic ford taurus. i purchased some of the scratch x just to see how it worked. the car had medium amount of swirl marks on it. i did the hood first; i applied 3 coats of the scratch x and i would estimate that it removed 50% of the swirl marks, using a mf applicator, (i am doing this by hand) my question is would the ssr 2.5 do a better job removing the swirls marks, (maybe take out the remaining ones) than the scratch x. or another possibility, is using ssr 3.0. any advice would be appreciated.


Dave.

 

[Poorboy]

to start with, removing swirls by hand is very hard and a lot of work.
I would use SSR2 by hand but if you feel like doing some rubbing, then SSR2.5 in small areas at a time will remove the swirls. Without actually seeing and working on the car myself, I could not posibly tell you how long or hard it would be.