Blackhole application.

[skylineboy]

I just want to make sure I use BalckHole the good way..

1.I use my WG black foam applicator ( by hand) and spread the product over a panel and do the whole car like that.
2. When I don't see any white streak I just put back more product on my foam.
3. I wait about 20 to 30 minute.
4. Buff it with a microfiber.

Is it the proper way?

 

[ronkh]

As soon as it hazes it's ok to remove the residue.

 

[Poorboy]

if should be worked in ..not layed down like a wax or sealant..... then wait for haze like Ron said :mrgreen:

 

[skylineboy]

if should be worked in ..not layed down like a wax or sealant..... then wait for haze like Ron said :mrgreen:

So Should I take out my Rotary with a black pad then?

 

[BigLeegr]

I'd go with a DA polisher, but if you use a rotary, use a very slow speed.

 

[skylineboy]

I'd go with a DA polisher, but if you use a rotary, use a very slow speed.

I don't own a DA. I will do it at Speed 1.

 

[Poorboy]

speed 1 or 2 will do with the black pad :wink: