SSR1 With Dual Action Polisher

[WG1]

Applied SSR1 yesterday with a DA polisher (white pad). It started out pink, then as I went, it turned sort of clear. My goal was to polish until it dusted (per instructions), but it really never dusted. I could of waited longer, but didn't want to mar the finish. Any advice?

 

[awd330]

I generally work the SSRs until they begin to disappear. Dusting doesn't normally happen for me. With SSR1, I normally use a polishing pad at speed 4.5-5.5. If I intend to use it for a glaze-like effect instead of as a swirl remover, I'll use a finishing pad at speed 4.